Two-Stage and Single Removable HLD & BIOHAZARD Labels that won’t leave residue.
- Protect staff members by clearly identifying potential biohazard risks.
- Insures compliance with OSHA Standard CFR 1910.1030 labeling requirements.
- Easy to apply and remove, even while wearing gloves.
- Low-tack adhesive leaves no residue.
 |
 |
 |
 |
| BCL500 |
HLD500 |
BH100 | CLN100 |
Two-Stage Labels for Unmarked Containers– Watch a Short Video
Signal Labels – BCL500, HLD500, BH100, CLN100 & CLN33
BCL500 – Clean/Biohazard Label, Double-Layered with Low-Tack Adhesive
A two stage temporary label used on unmarked containers. The top CLEAN label layer is visible on the container when transporting STERILE instruments to the procedure room. After the procedure, peel the top CLEAN label layer off to expose the underlying BIOHAZARD label layer. With the BIOHAZARD label layer exposed, the container holding the contaminated instruments can be returned to reprocessing area. After the soiled instruments are removed from the container, the BIOHAZARD label layer can be easily peeled off of the container without leaving residue.
HLD500 – High-Level Disinfected/Biohazard Label, Double-Layered with Low-Tack Adhesive
The same two stage label concept as BCL500 except the top layer reads “High-Level Disinfected” and allows space for notations. The top High-Level Disinfected label layer can be peeled off to expose the underlying BIOHAZARD label layer.
BH100 – Biohazard Label, Single-Layered with Low-Tack Adhesive
Used on unmarked containers transporting SOILED instruments that require a temporary label indicating that the instruments are contaminated and potentially infectious. Often these containers are used for other purposes so a permanent label is problematic.
CLN100 – Clean Label, Single-Layered with Low-Tack Adhesive
Used on containers carrying CLEAN or STERILE instruments in a container permanently marked with a biohazard legend. The CLEAN label is temporarily placed over the biohazard legend and is easily removed when the container is needed to carry the SOILED instruments back to the reprocessing area.
CLN33 – Surface Disinfection Verification Label Pads with Low-Tack Adhesive
A simple means of communicating when items are ready for use. Labels are sold in pads of 100 similar to “post-it” note pads. The labels are removable with low-tack adhesive and are latex-free. Call points; Infection Control, Environmental Services, Sterile Processing, Clinics and Procedure Rooms.
 |
 |
| SKU | DESCRIPTION | SIZE | UNITS/CASE |
|---|---|---|---|
| BCL500 | Removable Clean/Biohazard Label, Double-Layered with Low-Tack Adhesive (5 Packs of 100) | 4" x 4" | 500 labels |
| HLD500 | Removable High-Level Disinfected/Biohazard Label, Double-Layered with Low-Tack Adhesive (5 Packs of 100) | 4" x 4" | 500 labels |
| BH100 | Removable Biohazard Label, Single-Layered with Low-Tack Adhesive (5 Packs of 100) | 4" x 4" | 500 labels |
| CLN100 | Removable Clean Label, Single-Layered with Low-Tack Adhesive (5 Packs of 100) |
4" x 4" | 500 labels |
| CLN33 | Surface Disinfected Label Pads, Low-Tack Adhesive, Latex-Free (100 labels per pad, 5 pads per pack, 2 packs per case) | 3" x 3" | 10 pads |